


T10
Electric ceiling drying with integrated LED lighting and an optional lower bedding rail.
- Design ultra-fin et gain de place : Corps d’environ 8,4 cm (valeur approximative selon le modèle et l’installation) pour aider à garder la zone du plafond visuellement plus nette, adapté aux espaces compacts comme les balcons, buanderies et zones de fenêtre en baie.
- Levage par télécommande pour faciliter le chargement : Montez et descendez l’étendoir à l’aide d’une télécommande, et mettez en pause/ajustez la hauteur dans la plage de levage pour un usage quotidien plus confortable (les fonctions peuvent varier selon le modèle).
- Capacité nominale jusqu’à 35 kg (si l’installation est correcte) : Capacité nominale jusqu’à 35 kg avec une installation appropriée et une répartition uniforme de la charge. Utilisez des fixations adaptées à votre type de plafond et ne dépassez pas la limite indiquée.
- Options de configuration à double barre : Le système à double barre permet des montages parallèles ou en ligne, afin d’aider à s’adapter à différentes configurations de plafond et de pièce (selon l’espace disponible et le mode de pose).
-
Trous anti-vent pour une suspension plus stable : Les trous anti-vent sont conçus pour aider à réduire le déplacement des cintres par brise légère et à maintenir les vêtements plus stables pendant le séchage quotidien (les résultats peuvent varier selon le type de cintre et les conditions).
Before ordering
Requires suitable structural ceiling support and a hardwired 220–240 V power supply. Check dimensions and installation requirements.

Choose how you dry
One slim design. Two useful setups.
Choose one main drying rail, or add a lower rail that you can bring down when bedding and clothes need separate space.

Single Rail
One drying rail for clothes, towels and suitable bed linen. A simple arrangement for everyday laundry.

With Bedding Rail
Lower the additional rail by hand when you want a second drying level. Keep it raised when you only need the main rail.

Made for the space above
Slim by design.Organised by detail.
The aluminium housing measures 10.6 cm wide and 8.8 cm high. Raise the drying rail toward the ceiling when laundry is finished.
Wave-shaped grooves help keep hangers in position and make it easier to space garments along the rail.
10.6 cm
housing width
8.8 cm
housing height
31–54
hanger positions by length

LOWER · LOAD · RAISE
Bring the Rail Within Reach
Lower the main drying rail with the remote control, pause at a comfortable height, and raise it towards the ceiling when you're done.
With up to 118 cm of vertical travel, the rail makes hanging laundry more convenient. A gentle upward lift can also activate automatic ascent.
Remote control
Raise, lower and pause
Lift-to-raise
Gentle lift activates ascent
Obstacle detection
Stops if an obstacle is detected
Upper-limit stop
Stops at the top position

Integrated lighting
Light where you need it.
A 24 W LED light is built into the slim ceiling housing, illuminating the laundry area beneath the airer.
Before you buy
Will it fit your space?
Check the selected size, overall dimensions, fixing-point spacing and clearance before ordering.
Choose an option
- Rail length
- 150 cm
- Housing width
- 10.6 cm
- Housing height
- 8.8 cm
- Hanger-position grooves
- 31
The 150 / 180 / 200 / 240 cm option refers to rail length. Overall unit length and mounting-hole centres require the final product drawings.
- Rail length
- 200 cm
- Housing width
- 10.6 cm
- Housing height
- 8.8 cm
- Hanger-position grooves
- 44
The 150 / 180 / 200 / 240 cm option refers to rail length. Overall unit length and mounting-hole centres require the final product drawings.
- Rail length
- 240 cm
- Housing width
- 10.6 cm
- Housing height
- 8.8 cm
- Hanger-position grooves
- 54
The 150 / 180 / 200 / 240 cm option refers to rail length. Overall unit length and mounting-hole centres require the final product drawings.
Lowering clearance
Inspirez-vous de nos clients
Vous pouvez l'installer sur :

Côté balcon

Rail à rideaux

Baie vitrée

Salon
About
Check the ceilingbefore you order.
T10 is intended for surface mounting beneath suitable load-bearing structure. A hardwired electrical supply is required.
2 Ceiling fixing points
Both fixings must reach suitable structural support, using hardware appropriate for the material.
220–240 V Hardwired supply
Provide a suitable electrical connection at the intended mounting location.
Recommended mount
Surface mounting is recommended. Recessed installation is not recommended for this model.
Concrete and timber: use suitable structural concrete or load-bearing timber with fixings chosen for the installation conditions.
Plasterboard: both fixings must reach the load-bearing structure behind the board; the board alone must not support the unit.
Electrical work: a qualified electrician should install the hardwired connection in accordance with local requirements.
Technical specifications.
Key figures are grouped here so the shopping page stays easy to scan.
Single Rail / With Bedding Rail
150 / 180 / 200 / 240 cm
10.6 × 8.8 cm
0–118 cm
Manually deployed or kept raised
Fixed 80 cm
35 kg
40 W
24 W
Aluminium
FAQ
Can I dry bed linen with Single Rail?
Yes. Single Rail can be used for suitable bed linen, towels and everyday clothing. With Bedding Rail adds a lower level for hanging clothes and larger items at the same time.
Does the bedding rail always hang down?
No. Keep it raised during everyday use, then lower it by hand when you want a second drying level. When fully deployed, it sits a fixed 80 cm below the main rail.
Does the bedding rail increase the 35 kg load capacity?
No. The 35 kg rating is the total load across the airer. With Bedding Rail gives you another hanging level, not another 35 kg of capacity.
Can the bedding rail move independently by motor?
No. It is deployed and stowed by hand. Its deployed gap below the main rail is fixed at 80 cm.
How do I know which length will fit?
Check the full unit length, ceiling fixing positions and lowering clearance for the chosen rail length. The final overall and mounting-hole dimensions must be added to this page before it is used to order.
Can it be fixed to a plasterboard ceiling?
Only if both fixings reach suitable load-bearing structure behind the plasterboard. The plasterboard alone must not support the airer.



















